Compacting plate RED C16 (1.5-6.0 t)

Compacting plate RED C16 (1.5-6.0 t) 240 kg

Hydraulic compacting plates are designed for soil compacting especially applications where are high requirements of end result. Typical applications are

• Soil stabilization in general
• Pipeline trenches and narrow locations
• Compacting or driving anywhere a boom can reach, and where a man cannot go
• Aggregate and soil compaction
• Steep slope compaction
• Waste compaction
• Backfilling, especially trench backfilling
• Breaking up frozen coal, salt and other type material

Very important aspect is safety, no need to have personnel in dangerous positions within the area of operation. Workers should be away from the danger of cave-ins or equipment contact

Hydraulic motor rotates eccentric rotator and creates vibration by delivering high impulse forces with high performance through hydraulically operated eccentric rotator. Vibration force generate stress waves in granular or loose material, bringing the air in the soil to the surface thus packing the particles much closer together. Greater impulse action works together with the carrier's downward force in order to compact soil. There are suspension rubbers in optimal angle which transfer vibration to bottom plate and causes compaction.

Red C compactors can work anywhere your excavator or backhoe can reach: in trenches, over and around pipe, or to the top of piling and sheet pile. It can work next to foundations, around obstructions, and even on steep slopes or rough terrain where conventional rollers and other machines either can't work or would be hazardous.

Also rotation as option.

Red C compactors have additional part available as option in case of very narrow trenches. Normally in downtown trenches are very narrow and compactor plates has to adapt requirements.

Available for excavators 1.0 – 60.0 ton.

Info

Installation

Bottom plate

Hydralic motor

Valve block

Eccentric

Rubbers

Rotation

Dozer blade