New products

All new products

Hydraulic Breaker Red 255 (29…40 t) 2520 kg

Hydraulic Breaker Red 255 (29…40 t) 2520 kg



Red Line Hydraulic Breaker for 29…40t excavators (61 700 –88 200 lb). Red breakers are fully hydraulically operated. For mine and quarry applications, excavation assistance, demolition, tunneling, underwater, boulder breaking etc. The membrane type breakers are fully hydraulically operated and this gurantees reliable hydraulic hammer operation

More details...

Request a quote:

Hydraulic Breaker Red 255 (29…40 t) 2520 kg

Red Line hydraulic breakers from Green Attachments have been designed to perform all types of demanding tasks of different applictions and materials. Green Attachments Red breakers are used at the open and close mine and quarry applications. Also typical applications are excavation assistance, demolition, tunnel construction, underwater application, boulder breaking etc.

Movement is achieved by the hydraulic oil pressure on the piston head and speeded up by the oil and gas load of the accumulator on the top of the piston. The main function of this accumulator is to keep the pressure same all the time at the top of the piston. Gas must be added only during service.

The membrane type breakers are fully hydraulically operated and this gurantees reliable operation when productivity matters. They can operate in all possible positions due to long and light piston and a large number of seals.

Hammers are designed to have an option for underwater operations. Also specially reinforced stone housing available. Continuous lubrication during operation available as an option.

The range consists of nineteen (19) hammer models for 0.75 to 100 tonne excavators (1 650 – 220 500 lb).

Read more info about brekers

Advantages of Red hydraulically operated breakers:

  • Constant blow energy
  • Low wear, resulting in high secondhand resale value of a breaker
  • Low thermal heat of oil means energy savings for end user
  • Good hydraulic shock absorption
  • Less maintenance of hammers, and therefore lower costs
  • Hammers have well designed hydraulics to minimize overheating.
  • The buffer system (side, top and bottom buffers) that is used in Red breakers, has a special impact and vibration absorbing properties.
  • Easy changing of tools
  • Noise isolation sheets as standard
  • Side rods are covered with the polyurethane to reduce stress and vibration on the thread
  • Long / short stroke adjustment from models Red 125 and up
Weightkg / lb2520 / 5556
Impact energyJoule /Ft.lb5610 / 4138
Excavator oil flowl/min / gpm180 - 250 / 47.6 - 66
Working pressurebar / psi140 / 2035
Tool diametermm / Inch150 / 5.9
Carrier weightt. / 1000 lb29-40 / 61.8 - 88.2
Noise levelLwA(db)132

30 other products in the same category :