Hydraulic Breaker Piikki GA050 (10 - 15t) 1003 kg

Review(s): 4

Hydraulic Breaker Piikki line hydraulic breaker for 10...15 t excavators. Piikki breakers are hydraulic demolition rock hammer / pecker and they are gas assisted. For many daily applications, excavation assistance, demolition etc. Very simple and reliable structure, cost effective solution you can rely on. The Piikki Series is built for versatility, daily...

€0.00

Out-of-Stock

On sale!

Quick view

Reference: Piikki Pro 250

Hydraulic Breaker Piikki Pro 250 (25...40) 2300 kg

Review(s): 0

Hydraulic Rock Breaker Piikki Pro 250 (25...40) 2300 kg Piikki Pro line hydraulic breaker for 25...40 t excavators.. Piikki Pro hydraulic rock breakers are fully hydraulically operated. For mine and quarry applications, excavation assistance, demolition, tunneling, boulder breaking, underwater etc. The membrane type breakers are fully hydraulically...

€0.00

Out-of-Stock

Demolition and Handling Grapple Yellow G 05 (5…12t)

Quick view

Reference: Yellow G 05

Demolition and Handling Grapple Yellow G 05 (5…12t)

Review(s): 0

Demolition and Sorting Grapple Demolition and Handling Grapple Yellow G 05 (5…12t) (8 800 – 18 000 lb). Yellow line demolition and handling grapples designed for demolition and recycling applications. Structure of sorting grapple is light but robust which means energy savings and good productivity. Selector grabs for tough work Due to demolition and...

€0.00

Estimated delivery time 4-6- weeks from the order

Quick view

Reference: PB 10

Pilot boom PB for excavators

Review(s): 0

Pilot boom PB for excavators Our range of PB pilot booms are designed for controlled pile installation. There can be a breaker or an auger mounted to the boom. Pilot Boom PB for Excavators is the ultimate solution for precise and efficient pile installation. Whether an auger or a breaker is installed, method of movement is same. There is an unit where...

€0.00

Out-of-Stock

Hydraulic Auger Red Agr 035 (2.0…5.0 t), 73 kg

Quick view

Reference: Red AGR Pro 035

Hydraulic Auger Red AGR Pro 035 (2.0…5.0 t), 73 kg

Review(s): 0

Hydraulic Auger Pro 035 AGR Pro line Hydraulic Augers for (2.0...5.0 t) excavators. AGR Pro hydraulic augers for excavators are designed for drilling holes, augers are an economical, robust solution for professionals. These earth drills can be used everywhere holes are needed by skid steer loaders, tractors, mini excavators, excavators, backhoe – loaders,...

€0.00

Out-of-Stock

All products

New products

New

Quick view

Reference: R 06NM

Pulveriser R 06 NM (5 … 13 t)

Review(s): 0

Pulveriser Pulveriser R 06 NM (5 … 13 t). Green Attachments R hydraulic demolition pulveriser is suitable for the secondary demolition phase as well as for the primary demolition. Concrete pulverizer's muncher's open structure of jaws maximise productivity and allow end result of suitable fraction size of concrete Advantages of R pulverisers: By...

€0.00

Out-of-Stock

New

Quick view

Reference: G 20NM

Demolition and Handling Grapple G 20NM (18...30t)

Review(s): 0

Demolition and Sorting Grapple G line demolition and sorting grapples for 18...30 t excavators. G 20, 1500 kg. Demolition and sorting grapples designed for demolition and recycling applications. Design of demolition grapples has been completed in order to acquire light but robust structure and good productivity. Due to demolition and sorting grapples'...

€0.00

Out-of-Stock

New

Quick view

Reference: G 10NM

Demolition and Handling Grapple G 10NM (9...22t)

Review(s): 0

Demolition and Sorting Grapple G line demolition and sorting grapples for 9...22 t excavators. G 10, 900 kg. Demolition and sorting grapples designed for demolition and recycling applications. Design of demolition grapples has been completed in order to acquire light but robust structure and good productivity. Due to demolition and sorting grapples'...

€0.00

Out-of-Stock

New

Quick view

Reference: G 05NM

Demolition and Handling Grapple G 05NM (5...15t)

Review(s): 0

Demolition and Sorting Grapple G line demolition and sorting grapples for 5...15 t excavators. G 05, 530 kg. Demolition and sorting grapples designed for demolition and recycling applications. Design of demolition grapples has been completed in order to acquire light but robust structure and good productivity. Due to demolition and sorting grapples'...

€0.00

Out-of-Stock

New

Quick view

Reference: R 13NM

Pulveriser R 13 NM (12 … 22 t)

Review(s): 0

Pulveriser Pulveriser R 13 NM (12 … 22 t). Green Attachments R hydraulic demolition pulveriser is suitable for the secondary demolition phase as well as for the primary demolition. Concrete pulverizer's muncher's open structure of jaws maximise productivity and allow end result of suitable fraction size of concrete Advantages of R pulverisers: By...

€0.00

Out-of-Stock

All new products

https://www.facebook.com/Greenattachments

Hydraulic breaker Rammer BR 4099 after market Chisel tool

Reference 33B2444B01

Rating

Write a review

Chisel tool for hydraulic breaker Rammer BR 4099

Chisel tool for hydraulic breaker Rammer BR 4099, D = 166 mm, after market tool

€0.00

Tax included

Quantity

Estimated delivery time 3-4- weeks from the order

Add to quote

Description

Chisel tool for hydraulic breaker Rammer BR 4099

Chisel tool for hydraulic breaker Rammer BR 4099, D = 166 mm, after market tool Chisel tools have been designed for general breaking.

Due to excellent penetration and good wedge effect it has numerous applications, such as:

Concrete: Reinforced floors, walls, foundations, blocks, columns, support

Sedimentary rock (limestone, sandstone, graywacke, calcareus sediment): Trenching, foundation work (Heavily fissured)

Crystalline/magmatic rock (magma, greenstone, gabbro, granite...): Trenching, foundation work, primary quarry breaking (Heavily fissured)

Asphalt: Road surfaces, transport routes

Soil: Frozen ground

Product Details

Reference 33B2444B01

Reviews

Be the first to write your review !

Write your review

Hydraulic breaker Rammer BR 4099 after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Rammer BR 4099 Moil point tool for hydraulic breaker Rammer BR 4099 , D = 166 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B2444D01

Hydraulic breaker Rammer BR 4099 after market Blunt tool

Review(s): 0

Blunt tool for hydraulic breaker Rammer BR 4099 Blunt tool for hydraulic breaker Rammer BR 4099 , D = 166 mm, after market tool. Blunt tools have been designed for secondary breaking. Due to blunt shape it has excellent energy transmission. Flat tool

€0.00

Estimated delivery time 3-4- weeks from the order

16 other products in the same category:

Quick view

Reference: 33B3414D01

Hydraulic breaker Atlas Copco Epiroc MB1000 after market Blunt tool

Review(s): 0

Blunt tool for hydraulic breaker Atlas Copco Epiroc MB1000 Blunt tool for hydraulic breaker Atlas Copco MB1000, D = 110 mm, after market tool. Blunt tools have been designed for secondary breaking. Due to blunt shape it has excellent energy transmission. Epiroc Flat tool

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B3405A01

Hydraulic breaker Atlas Copco Epiroc HB2500 after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Atlas Copco Epiroc HB2500 Moil point tool for hydraulic breaker Atlas Copco HB2500, D = 155 mm, after market tool Epiroc moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B2442B01

Review(s): 0

Moil point tool for hydraulic breaker Rammer E64 Moil point tool for hydraulic breaker Rammer E64 , D = 106 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B2211D01

Hydraulic breaker Furukawa F45 after market Blunt tool

Review(s): 0

Blunt tool for hydraulic breaker Furukawa F45 Blunt tool for hydraulic breaker Furukawa F45, D = 165 mm, after market tool. Blunt tools have been designed for secondary breaking. Due to blunt shape it has excellent energy transmission. Flat tool

€0.00

Estimated delivery time 3-4- weeks from the order

On sale!

Quick view

Reference: 33B2421A01

Hydraulic breaker Rammer S27 after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Rammer S27 Moil point tool for hydraulic breaker Rammer S27 , D = 84 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order

On sale!

Quick view

Reference: 33B2444A01

Hydraulic breaker Rammer BR 4099 after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Rammer BR 4099 Moil point tool for hydraulic breaker Rammer BR 4099 , D = 166 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B3470D01

Hydraulic breaker Atlas Copco Epiroc MB1500 after market Blunt tool

Review(s): 0

Blunt tool for hydraulic breaker Epiroc Blunt tool for hydraulic breaker Atlas Copco MB1500, D = 135 mm, after market tool. Blunt tools have been designed for secondary breaking. Due to blunt shape it has excellent energy transmission. Epiroc Flat tool

€0.00

Out-of-Stock

Quick view

Reference: 33B0102D01

Hydraulic breaker Red 021 Blunt tool

Review(s): 0

Blunt tool for Hydraulic breaker Blunt tool for Hydraulic breaker Red 021, D = 68 mm. Blunt tools have been designed for secondary breaking. Due to blunt shape it has excellent energy transmission. Flat tool

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B2211B01

Hydraulic breaker Furukawa F45 after market Chisel tool

Review(s): 0

Chisel tool for hydraulic breaker Furukawa F45 Chisel tool for hydraulic breaker Furukawa F45, D = 165 mm, after market tool

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B2402D01

Hydraulic breaker Rammer E64 after market Blunt tool

Review(s): 0

Blunt tool for hydraulic breaker Rammer E64 Blunt tool for hydraulic breaker Rammer E64 , D = 106 mm, after market tool. Blunt tools have been designed for secondary breaking. Due to blunt shape it has excellent energy transmission. Flat tool

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B2209A01

Hydraulic breaker Furukawa F35 after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Furukawa F35 Moil point tool for hydraulic breaker Furukawa F35 , D = 150 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order