Hydraulic Breaker Piikki GA050 (10 - 15t) 1003 kg

Review(s): 4

Hydraulic Breaker Piikki line hydraulic breaker for 10...15 t excavators. Piikki breakers are hydraulic demolition rock hammer / pecker and they are gas assisted. For many daily applications, excavation assistance, demolition etc. Very simple and reliable structure, cost effective solution you can rely on. The Piikki Series is built for versatility, daily...

€0.00

Out-of-Stock

On sale!

Quick view

Reference: Piikki Pro 250

Hydraulic Breaker Piikki Pro 250 (25...40) 2300 kg

Review(s): 0

Hydraulic Rock Breaker Piikki Pro 250 (25...40) 2300 kg Piikki Pro line hydraulic breaker for 25...40 t excavators.. Piikki Pro hydraulic rock breakers are fully hydraulically operated. For mine and quarry applications, excavation assistance, demolition, tunneling, boulder breaking, underwater etc. The membrane type breakers are fully hydraulically...

€0.00

Out-of-Stock

Demolition and Handling Grapple Yellow G 05 (5…12t)

Quick view

Reference: Yellow G 05

Demolition and Handling Grapple Yellow G 05 (5…12t)

Review(s): 0

Demolition and Sorting Grapple Demolition and Handling Grapple Yellow G 05 (5…12t) (8 800 – 18 000 lb). Yellow line demolition and handling grapples designed for demolition and recycling applications. Structure of sorting grapple is light but robust which means energy savings and good productivity. Selector grabs for tough work Due to demolition and...

€0.00

Estimated delivery time 4-6- weeks from the order

Quick view

Reference: PB 10

Pilot boom PB for excavators

Review(s): 0

Pilot boom PB for excavators Our range of PB pilot booms are designed for controlled pile installation. There can be a breaker or an auger mounted to the boom. Pilot Boom PB for Excavators is the ultimate solution for precise and efficient pile installation. Whether an auger or a breaker is installed, method of movement is same. There is an unit where...

€0.00

Out-of-Stock

Hydraulic Auger Red Agr 035 (2.0…5.0 t), 73 kg

Quick view

Reference: Red AGR Pro 035

Hydraulic Auger Red AGR Pro 035 (2.0…5.0 t), 73 kg

Review(s): 0

Hydraulic Auger Pro 035 AGR Pro line Hydraulic Augers for (2.0...5.0 t) excavators. AGR Pro hydraulic augers for excavators are designed for drilling holes, augers are an economical, robust solution for professionals. These earth drills can be used everywhere holes are needed by skid steer loaders, tractors, mini excavators, excavators, backhoe – loaders,...

€0.00

Out-of-Stock

All products

https://www.facebook.com/Greenattachments

Hydraulic breaker Furukawa F35 after market Blunt tool

Reference 33B2209D01

Rating

Write a review

Blunt tool for hydraulic breaker Furukawa F35

Blunt tool for hydraulic breaker Furukawa F35, D = 150 mm, after market tool. Blunt tools have been designed for secondary breaking. Due to blunt shape it has excellent energy transmission.

Flat tool

€0.00

Tax included

Quantity

Estimated delivery time 3-4- weeks from the order

Add to quote

Description

Blunt tool for hydraulic breaker Furukawa F35, D = 150 mm, after market tool

Blunt tools have been designed for secondary breaking. Due to blunt shape it has excellent energy transmission.

It has numerous applications, such as:

Concrete: Non-reinforced floors, walls, foundations, blocks, columns, support, recycling

Sedimentary rock (limestone, sandstone, graywacke, calcareus sediment): Trenching, foundation work (Lightly fissured or monolithic) and also breaking oversize's

Crystalline/magmatic rock (magma, greenstone, gabbro, granite...): Trenching, foundation work, primary quarry breaking (Lightly fissured or monolithic) and also breaking oversize's

Product Details

Reference 33B2209D01

Reviews

Be the first to write your review !

Write your review

Hydraulic breaker Furukawa F35 after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Furukawa F35 Moil point tool for hydraulic breaker Furukawa F35 , D = 150 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B2209B01

Hydraulic breaker Furukawa F35 after market Chisel tool

Review(s): 0

Chisel tool for hydraulic breaker Furukawa F35 Chisel tool for hydraulic breaker Furukawa F35, D = 150 mm, after market tool

€0.00

Estimated delivery time 3-4- weeks from the order

16 other products in the same category:

Retainer bar for hydraulic breaker Atlas Copco HB4700

Quick view

Reference: HB7000 retainer bar

Hydraulic breaker Atlas Copco Epiroc HB7000 after market retainer bar

Review(s): 0

Retainer bar for hydraulic breaker Epiroc Retainer bar for hydraulic breaker Atlas Copco Epiroc HB7000

€0.00

Out-of-Stock

Quick view

Reference: GB 5TL Sylinteri

Hydraulic Breaker GB 5TL aftermarket cylinder

Review(s): 0

Cylinder This contains the moving piston which strikes the tool. The seals for both ends of the piston are also located in the cylinder. The seals for the upper end of the piston are located in a removable seal retainer while the seals for the lower end of the piston are located in proves machined directly into the cylinder.

€0.00

Out-of-Stock

Quick view

Reference: B103330101010

Hydraulic breaker Red 009 Blunt tool

Review(s): 0

Blunt tool for Hydraulic breaker Blunt tool for Hydraulic breaker Red 009, D = 38 mm. Blunt tools have been designed for secondary breaking. Due to blunt shape it has excellent energy transmission. Flat tool

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: SB151 moil point tool

Hydraulic breaker Soosan SB151 TS+P after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Soosan SB151 Moil point tool for hydraulic breaker Soosan SB151 TS+P , D=185mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Out-of-Stock

Quick view

Reference: Seal Set Soosan SB 045

Seal set Soosan SB 045 after market set

Review(s): 0

Seal set Seal set for hydraulic breaker Soosan SB 045, after market set

€0.00

Out-of-Stock

Quick view

Reference: 33B0141B01

Hydraulic breaker Red 011 Chisel tool

Review(s): 0

Chisel tool for hydraulic breaker Chisel tool for hydraulic breaker Red 011, D = 45 mm. Chisel tools have been designed for general breaking. Due to excellent penetration and good wedge effect it has numerous application

€0.00

Estimated delivery time 3-4- weeks from the order

On sale!

Quick view

Reference: 33B2422A01

Hydraulic breaker Rammer S29 after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Rammer S29 Moil point tool for hydraulic breaker Rammer S29 , D = 95 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B2644A01

Hydraulic breaker Montabert SC36 after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Montabert SC36 Moil point tool for hydraulic breaker Montabert SC36, D = 77 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B2403B01

Hydraulic breaker Rammer E65 after market Chisel tool

Review(s): 0

Chisel tool for hydraulic breaker Rammer E65 Chisel tool for hydraulic breaker Rammer E65 D = 125 mm, after market tool

€0.00

Estimated delivery time 3-4- weeks from the order

On sale!

Quick view

Reference: 33B2417A01

Hydraulic breaker Rammer S23 after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Rammer S23 Moil point tool for hydraulic breaker Rammer S23 , D = 63 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order

On sale!

Quick view

Reference: 33B2415A01

Hydraulic breaker Rammer S21 after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Rammer S21 Moil point tool for hydraulic breaker Rammer S21 , D = 45 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: HB4700 pyramid tool

Hydraulic breaker Atlas Copco Epiroc HB4700 after market pyramid tool

Review(s): 0

Pyramid tool for hydraulic breaker Epiroc Pyramid tool for hydraulic breaker Atlas Copco Epiroc HB4700, D = 190 mm, after market tool

€0.00

Out-of-Stock

Quick view

Reference: 33B2721A01

Hydraulic breaker Soosan SB81 TS+P after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Soosan SB81 Moil point tool for hydraulic breaker Soosan SB81 TS+P , D = 140 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Out-of-Stock

Quick view

Reference: 33B2209B01

Hydraulic breaker Furukawa F35 after market Chisel tool

Review(s): 0

Chisel tool for hydraulic breaker Furukawa F35 Chisel tool for hydraulic breaker Furukawa F35, D = 150 mm, after market tool

€0.00

Estimated delivery time 3-4- weeks from the order

Quick view

Reference: 33B2719A01 SB60

Hydraulic breaker Soosan SB60 TS+P after market moil point tool

Review(s): 0

Moil point tool for hydraulic breaker Soosan SB60 Moil point tool for hydraulic breaker Soosan SB60 TS+P , D = 125 mm, after market tool Moil point tools have been designed for general breaking.

€0.00

Out-of-Stock

Quick view

Reference: Upper tool bushing HB3100

Upper tool bushing Atlas Copco Epiroc HB3100 after market part

Review(s): 0

Upper tool bushing Epiroc Upper tool bushing Atlas Copco Epiroc HB3100 after market part

€0.00

Out-of-Stock