Piikki models
Piikki parts
Piikki buffers
Piikki tie rods
Piikki autogreasing
Piikki housing
Features
Piikki models
There are 17 models available for 0.8 - 80 t excavators
Piikki parts
There are only two moving parts. It makes the system simple and reliable
Piikki buffers
The buffer system (side, top and bottom buffers) used in Piikki breakers has a special impact and vibration absorbing properties to protects the breaker and excavator.
Piikki tie rods
Tie rods have special design to reduce stress and vibration on the thread. The side rod design is flexible, thus there is less vibration forces on the thread.
Piikki autogreasing
The breakers wearing parts must be lubricated continuously during the operation because these parts can wear rapidly. Optional autogreasing pump can do it automaticly.
Piikki housing
Housing material is a special, strong material. Also the weldings on housing are reduced and no housing bolts are used. This makes the housing more rigid and stronger.
Piikki bushings
Piikki breaker upper and lower bushings are made of steel instead of bronze. This guarantees longer life time
Piikki silent
The breaker inner parts do not directly touch the housing. There are noise isolation sheets and plastic covers to reduce the noise of breaker. Polyethilen and polyurethane buffers used in the housing, prevents metal to metal touching.
Replacing tools of Piikki
Easy to change tool without using hammer
Piikki power
Daily breaking volume is high. It vary substantially, depending on the place of usage, the hardness and type of the material to be broken, the mounting base machine, the operator's skills etc.
